Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 126 –
Startup (continued)
7.5 Checking the Optional Network Connection
Networking details
The following details are required from the network operator for
starting up and checking the network:
D IP address
D Subnet mask
D (Gateway)
Notes for checking the network
Use the following test programs to start up and check the network:
1. Select ”Start → All Programs → Accessories → Command prompt” .
2. The following commands are available:
ping
This command is only available if the TCP/IP protocol is installed.
ping localhost
This program checks communication with its own computer. Net-
working is a requirement for token ring.
ping <Name of remote station> or
ping <TCP/IP address of the remote station>
This program checks communication with the remote station.
arp –a
The program displays other computers after contact has been estab-
lished with them.
ipconfig
Displays all current TCP/IP network configuration values
(IP address, subnet mask, standard gateway)
tracert <Name of the remote station>
This program determines the route to a destination.
net view
Shows all available remote stations.