Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 102 –
Configuration (continued)
6.2.20 Configuring storage job macros
(Job macros/save menu)
Job macros, e.g. saving images automatically (so–called storage job macros),
define sequences (jobs) that should either run continuously or when an alarm
is triggered. These jobs, which are only defined once, can then be used for
variable alarm triggers and cameras.
No. Name Description
1 New
Creates a new storage job macro.
Click on New and enter the name in the input box.
2 Delete
Deletes an existing storage job macro.
Select a storage job macro in the list box and click
on Delete. The storage job macro will be deleted.
3 Copy Copies an existing storage job macro.
Select a storage job macro in the list box and click
on Copy. The storage job macro is copied and can
be adapted quickly.
4 Number of images Enter the number of images to be recorded per
second in the Number of images input box.
Note:
The system does not check the plausibility of the
configured images here. Please check this yourself.
5 Interval job Activate Interval job if recording is not to be
continuous, but intermittent recordings are needed. If
this is the case, enter:
Recording time The duration of a recording.
Pause The time between recordings