Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 48 –
Connections (continued)
4.18 Connecting a Security System
4.18.1 General remarks
The video system is connected to a SecSys via an RS 232 interface at
COM x, e. g. by connecting an interface converter OVS in between.
RS 232
interface
Interface
converter
Bosch
SecSys
COM x
video
system
OVS
OPTOC3
No specific alarm modifications are necessary on the security system for
connection to the video system. A suitable interface module is required.
All settings are made via the video system user interface:
Data transmission must be enabled in the SecSys and the SecSys must
be equipped with a suitable interface module (see Connections).
With the OVS it is possible to compensate any differences in the transmit-
ter and receiver line assignments of the devices on the V.24 side of the
link. To do this change the jumpers J1 and J2.