Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 84 –
Configuration (continued)
4 Setup These settings can be set individually for each
camera. They will remain saved until a change is
carried out.
Click on Setup to do the following:
– change the image settings such as brightness,
contrast, color and compression for all camera
types;
– in addition with sensor cameras the areas to be
monitored must be drawn in and the sensitivity
set
– and implement the interface settings, camera
positions and camera controls for dome
cameras.
The individual setup settings are explained in a
subsequent section.
5 Accept Click on Accept. If you have made incorrect
inputs, click on Reject and start over.