Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 78 –
Configuration (continued)
6.2.10 Configuration of alarm simulation
(Hardware/alarm simulation menu)
The video system supports 4 alarm inputs, which can be simulated for triggering
test alarms.
Note: Function must be activated under Hardware/Connections.
No. Name Description
1 Input Click on the corresponding input. The selected
line is activated.
Please ensure that input 1 corresponds to the
button Alarm 1, input 2 corresponds to the button
Alarm 2, etc.
2 Type Click on the arrow pointing downwards in the
Type column and select whether the test alarm
input should be configured or not.
The input should be used for alarm simulation.
The input should not be used for alarm simulation.
3 Name Place the cursor in the Name column and enter
the name. Any name can be chosen.
4 Accept Click on Accept. If you have made incorrect in-
puts, click on Reject and start over.