Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 107 –
Configuration (continued)
6.2.22 Configuring backup job macro
(Job macros/backup menu)
Job macros define sequences (jobs) that should either run continuously or
when an alarm is triggered. These jobs, which are only defined once, can then
be used for variable alarm triggers and cameras.
For back job macros, the current day’s images can automatically be saved to
a network drive for example. Activation of the job macro occurs in the Job
activation menu.
Before you begin the backup job macro:
Before you can setup a backup job macro in the configuration, you have to
create a search macro in the image archive and save. Set the criteria in this
search macro that is to be used when searching for images. This search macro
is assigned to a backup job macro when configuring (see in no. 4: “Configuring
backup job macro”).
This is how you can create a search macro:
D Call up the image archive.
D Select the Database/search dialog (Single images) menu.
D Define the time, camera number, archives and remote stations for the
search macro in this dialog box.
D Click on the Search macros tab in the dialog box in the upper left side and
select the command Save .
D Enter a name for the search macro and confirm with OK. This saved
search macro appears in the configuration and can be selected.
D Leave the image archive and call up the configuration via the
Configuration menu. You can now create a backup job macro.