Filter
Top Products
Remove and Replace
WFM90D and WFM91D Service Manual
6-27
Bushing
Bushing
Turnlock
Battery cover
Figure 6- 12: Removal and replacement of the turnlock stud
Replace. To replace the turnlock stud and bushing:
1. Press the turnlock stud into the bushing.
2. To install the turnlock stud and bushing into the battery cover, press firmly
on the turnlock stud head. Be sure to keep the bushing head level with the
battery cover while you press on the turnlock stud. The bushing will snap
into place when it is correctly installed.
3. Install the battery cover. Refer to Battery Cover on page 6--25.