Filter
Top Products
Remove and Replace
WFM90D and WFM91D Service Manual
6-37
Remove. To remove the AC adapter EMI suppressor:
1. Release the retaining latches on the side of the EMI suppressor.
2. Pull the AC adapter cord from the EMI suppressor.
Replace. To replace the AC adapter EMI suppressor:
1. Place the EMI suppressor within 12 inches of the end of the adapter cord.
NOTE. The EMI suppressor is most effective when placed close to the end of the
AC adapter cord.
2. Loop the AC adapter cord through the middle of the EMI suppressor. C lose
the EMI suppressor until the sides of the suppressor latch together. See
Figure 6--18.
Loop the cord
through once
EMI suppressor
Figure 6- 18: Installing the EMI suppressor
AC Adapt er EMI
Suppressor