Using the Menus
2-26
WFM90D and WFM91D Service Manual
Line Select Menu
Enter the Waveform, Vector, or WIP operating mode.
Press the LINE S EL button to turn on Line Select mode and open the Line Select
menu. The number of the selected line and/or field displays in the menu bar over
the right two Bezel Buttons.
The Line Select menu is shown in Figure 2--11 on page 2--16 and the Line Select
menu choices are shown in Table 2--9.
Table 2- 9: Line Select menu choices
Selection Function
FIELDS ALL Selects all video fields for display. The two right bezel buttons select which
line number is displayed. The menu bar over these two buttons displays the
selected line number.
FIELDS 1 OF 2 When 1OF 2 is selected, the menu selection ALT FIELD appears. This
allows you to select the video field in which the selected line is displayed.