Filter
Top Products
Remove and Replace
WFM90D and WFM91D Service Manual
6-29
Press
Grasp wire
Figure 6- 13: Removing the NiMH battery pack
Remove. To remove the C-size alkaline batteries:
1. Remove the battery cover. Refer to Battery Cover on page 6--25.
2. Carefully pull the batteries out of the battery compartment.
Replace. To replace the C-size alkaline batteries:
1. Press the batteries into place according to the polarity label on the bottom of
the battery compartment. S ee Figure 6--14.
NOTE. The polarity of the alkaline batteries must be correct for the instrument to
operate. Always replace all of the alkaline batteries at the same time when
replacing discharged batteries.
Alkaline Batteries