Filter
Top Products
• *RST Condition: none; macro defintions are unaffected
• Power-On Condition: no macros are defined
Example Define macro to set ’Input 1’ impedance
*DMC "RESTART","INP1:IMP 50" Define macro
*EMC and *EMC?
*EMC <enable> enables and disables macro usage. When enable is zero, macros
usage is disabled. Any non-zero value enables macro usage.
The query form returns 1 if macro usage is enabled, 0 if disabled.
Comments
• Macro definitions are not affected by this command.
• Executable when initiated: Yes
• Coupling group: none
• *RST Condition: macro usage is disabled
• Power-On Condition: macro usage is enabled
*ESE and *ESE?
*ESE <mask> enables one or more event bits of the Standard Event Status Register
to be reported in bit 5 (the Standard Event Status Summary Bit) of the Status Byte
Register. Mask is the sum of the decimal weights of the bits to be enabled.
The query form returns the current enable mask.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
mask numeric 0 through 255 none
A 1 in a bit position enables the corresponding event; a 0 disables it.
Comments
• Executable when initiated: Yes
• Coupling group: none
• Related Commands: *ESR?, *SRE, *STB?
• *RST Condition: unaffected
*EMC and *EMC?
IEEE-488.2 Common Commands Command Reference 3-27