Filter
Top Products
INPut2
The INPut2 subsystem controls the input attenuation and impedance of the
Agilent E1446A’s “Input 2” BNC.
Subsystem Syntax INPut2
:ATTenuation <attenuation>
:IMPedance <impedance>
:ATTenuation
INPut2:ATTenuation <attenuation> controls the input attenuator of the “Input 2”
BNC. Input attenuation can range from 0 to 31 dB in 1 dB steps.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
impedance numeric 0 through 31.0 |
MINimum|MAXimum
dB
MINimum selects 0 dB attenuation; MAXimum selects 31 dB.
Comments
• Coupling group: none
• *RST Condition: INPut2:ATTenuation 0
Example Setting 20 dB input attenuation
INP2:ATT 20 Set 20 dB input attenuation
:IMPedance
INPut2:IMPedance <impedance> sets the input impedance of the “Input 2” BNC
to either 50Ω, 75Ω, or 1 MΩ.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
impedance numeric 50|75|1.0E6|
MINimum|MAXimum
Ohms
MINimum selects 50Ω input impedance; MAXimum selects 1 MΩ.
3-10 E1446/E1405/06 Command Reference INPut2 Subsystem