Filter
Top Products
OUTPut4
The OUTPut4 subsystem controls the output impedance of the Agilent E1446A’s
“Diff Output -” output.
Subsystem Syntax OUTPut4
:IMPedance <impedance>
:IMPedance
OUTPut4:IMPedance <impedance> sets the output impedance “Diff Output -”
BNC to either 50Ω or 75Ω.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
impedance numeric 50|75|
MINimum|MAXimum
Ohms
MINimum selects 50Ω output impedance; MAXimum selects 75Ω.
Comments
• Executable when initiated: Yes
• Coupling group: none
• *RST Condition: OUTPut4:IMPedance 50
Example
Setting 75 Ω output impedance
OUTP4:IMP 75
Set 75 Ω output impedance
3-16 E1446/E1445 Command Reference OUTPut4 Subsystem