Filter
Top Products
Example Programs
The example programs in this section include:
• Generating and amplifying sine waves
• Selecting the input impedance
• Using the differential (small signal) outputs
• Setting a DC offset voltage
• Summing two signals
These programs configure the amplifier according to the block diagram of
Figure 2-1. The program descriptions will often refer to this figure. The
programs were written with the amplifier configured as a servant of the
Agilent E1445A AFG, and as a servant of the Agilent E1405 Command
Module.
Refer to Chapter 3, "Command Reference" for a detailed description of the
Agilent E1446A commands. Refer to Chapter 8 of the "Agilent E1445A
Arbitrary Function Generators User’s Manual" for a detailed description of
the Agilent E1445A commands.
Figure 2-6. E1446A Functional Block Diagram.
2-8 Programming the Agilent E1446A Example Programs