Filter
Top Products
OUTPut3
The OUTPut3 subsystem controls the output impedance of the Agilent E1446A’s
“Diff Output +” output.
Subsystem Syntax OUTPut3
:IMPedance <impedance>
:IMPedance
OUTPut3:IMPedance <impedance> sets the output impedance “Diff Output +”
BNC to either 50Ω or 75Ω.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
impedance numeric 50|75|
MINimum|MAXimum
Ohms
MINimum selects 50Ω output impedance; MAXimum selects 75Ω.
Comments
• Executable when initiated: Yes
• Coupling group: none
• *RST Condition: OUTPut3:IMPedance 50
Example
Setting 75 Ω output impedance
OUTP3:IMP 75
Set 75 Ω output impedance
OUTPut3 Subsystem E1446/E1445 Command Reference 3-15