Filter
Top Products
• Related commands: *DMC, *PMC
• *RST Condition: none
*RST
*RST resets the Agilent E1446A as follows:
• Sets all commands to their *RST state.
• Aborts all pending operations including waveform generation.
*RST does not affect:
• The output queue
• The Service Request Enable Register
• The Standard Event Status Enable Register
• The enable masks for the OPERation Status and Questionable Signal registers
Comments
• Executable when initiated: Yes
• Coupling group: none
• *RST Condition: none
*SAV
*SAV <number> stores the current programming state into one of the 10 possible
stored state areas. Number indicates which of the stored state areas should be used.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
number numeric 0 through 9 none
Comments
• Executable when initiated: No
• Coupling group: none
• Related Commands: *LRN?, *RCL, *RST
• *RST Condition: unaffected
• Power-on Condition: all saved states set to the same state as the *RST state
*RST
3-32 Command Reference IEEE-488.2 Common Commands