Filter
Top Products
Table B-1. Agilent E1446A Error Messages (Con’t.)
Code Message Description
-178 Expression data not allowed Expression data was specified when another
parameter type is required.
-183 Macro execution error Macro program data sequence could not be executed
due to invalid data inside the macro definition.
-221 Settings conflict See "Settings Conflict Error Messages" at the end of
this table.
-222 Data range error Data out of range.
-270 Macro error *RMC < name> was executed and name is not
defined.
-272 Macro execution error Macro program data sequence could not be executed
due to a syntax error within the macro definition.
-273 Illegal macro label The macro label defined in the *DMC command was
too long, the same as a common command keyword,
or contained invalid header syntax.
-276 Macro recursion error A macro program data sequence could not be
executed because the sequence leads to the
execution of a macro being defined.
-277 Macro redefinition not allowed A macro label in the *DMC command could not be
executed because the macro label was already
defined.
-330 Self-test failed Note the information associated with the message for
a description of the failure.
-350 Too many errors The Agilent E1446A error queue is full and additional
errors have occurred.
-410 Query INTERRUPTED The Agilent E1446A was sent a command before it
was finished responding to a query command.
-420 Query UNTERMINATED The controller (computer) attempts to read a query
response from the Agilent E1446A without having first
sent a complete query command.
-430 Query DEADLOCKED The Agilent E1446A’s input and output buffers are full
and the Amplifier cannot continue
-440 Query UNTERMINATED after
indefinite response
Occurs when the *IDN? query is not the last query
executed in a command string
Agilent E1446A Error Messages B-3