Filter
Top Products
Secondary GPIB Address : Determined by dividing the logical address of
the device by 8. If the amplifier is used with the Agilent E1445A, the
secondary address is the E1445A logical address/8. If the amplifier is used
with the Agilent E1405/06 Command Module, the secondary address is the
E1446A logical address/8.
Agilent E1445A AFG
An example of the GPIB address in an BASIC statement when the amplifier
is a servant of the Agilent E1445A is:
OUTPUT 70910;"SOUR2:VOLT:OFFS 3"
Where:
Interface Select Code = 7
(Command Module) Primary GPIB Address = 09
Secondary GPIB address (Agilent E1445A logical address/8) = 10
Agilent E1405/06 Command Module
An example of the GPIB address in an BASIC statement when the amplifier
is a servant of the Agilent E1405/06 is:
OUTPUT 70911;"SOUR:VOLT:OFFS 3"
Where:
Interface Select Code = 7
(Command Module) Primary GPIB Address = 09
Secondary GPIB address (Agilent E1446A logical address/8) = 11
Refer to Chapter 2, "Programming the Agilent E1446A", for more detailed
information.
1-6 Getting Started Preparation for Use