Filter
Top Products
Instrument Driver
and Example
Programs Disks
The E1446A instrument driver and the example programs contained in this
manual are located on the following disks:
• Agilent E1446A Instrument Driver and BASIC Example
Programs - 3.5" 720 kbyte disk LIF Format (E1446-10031)
• Agilent E1446A Instrument Driver and BASIC Example
Programs - 3.5" 1.44 Mbyte disk DOS Format (E1446-10032)
The example programs are SCPI programs written in BASIC. On the LIF
formatted disk (E1446-10031), the programs are in LOAD / STORE
(PROG) format. On the DOS formatted disk (E1446-10032), the programs
are in GET / SAVE (ASCII) format.
System
Configuration
Each program in this chapter is written in BASIC. Except where noted, the
programs were developed on the following system:
Controller: HP 9000 Series 300
Mainframe: Agilent 75000 Series C
Slot 0/Resource Manager: Agilent E1405B Command
Module
E1445A Logical Address: 80
E1445A Servant Area: 8
E1446A Logical Address: 88
Instrument Language: SCPI
2-4 Programming the Agilent E1446A Instrument and Programming Languages