Filter
Top Products
14 - 38
14. COMMUNICATION FUNCTION
(6) Motorless operation
(a) Performing motorless operation
Transmit command [8][B] + data No. [0][0] + data "0003" to perform motorless operation.
Selection of test operation mode
3: Motorless operation
0003
To perform operation after performing the motorless operation, issue a command from the host
controller.
(b) End of motorless operation
The motorless operation cannot be canceled in the same way as the test operation mode (transmit
command [8][B] + data No. [0][0] + data "0000"). To cancel the motorless operation, power on the servo
amplifier and shift to the usually operation mode.