Filter
Top Products
Maintenance
1705A Spectrum Monitor
6-23
TO REMOVE
FRONT PANEL
ASSEMBLY
TO REMOVE
FRONT PANEL
ASSEMBLY
TO SEPARATE
BOARD FROM THE
FRONT PANEL
Figure 6-10: Screws securing the front panel board (A2) in place
3. Remove the board by slipping it through the front--panel opening.
4. To access the Front-Panel board components:
a. Remove the knobs from the front.
b. Remove the four screws from the rear.
c. The board should now separate from the front panel making the
components accessible.
1. Unsolder the five wires from the tuner.
2. Unplug the phone jack from the tuner.
3. Remove the rear-panel L--BAND INPUT connector hex nut. See Fig-
ure 6-11.
Removing the L- Band
Tuner