Filter
Top Products
Operating the Picture
Adjustment
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the parking brake (refer to
Parking brake interlock on page 20).
1 Touch [V.Adjust] in System menu.
2 Select the desired item you want to ad-
just.
! Camera — Switch to the picture adjust-
ment display for the rear view camera
! Source — Switch to the picture adjustment
display for the AV source screen
! Map — Switch to the picture adjustment
display for the map screen
p When the display is already on the screen,
a message to that effect appears.
Brightness — Adjust the black intensity
Contrast — Adjust the contrast
Color — Adjust the color saturation
Hue — Adjust the tone of color (red is empha-
sized or green is emphasized)
Dimmer — Adjust the brightness of display
p The adjustments of Brightness, Contrast
and Dimmer are stored separately when
your vehicle’s headlights are off (daytime)
and when your vehicle’s headlights are on
(nighttime). These are switched automati-
cally depending on the vehicle’s headlights
are on or off.
p You cannot adjust Color and Hue for the
source without video and navigation map
display.
p If you select [Source], sources without
video and sources with video are saved se-
parately in the memory.
p The picture adjustment may not be able to
be used with some rear view cameras.
p The same setting is selected for the normal
background picture and the navigation
map display.
p Because of the LCD screen characteristics,
you may not be able to adjust the screen at
low temperatures.
3 Touch [+] or [-] to adjust the selected
item.
Each time you touch [+]or[-] increases or de-
creases the level of selected item. +24 to -24
is displayed as the level is increased or de-
creased.
p Adjust Dimmer in the range of +1 to +48.
4 Touch [ESC] to return to the previous
screen.
Switching the backlight On/Off
By turning off the backlight of the LCD screen,
you can turn off the screen display without
turning off the voice guidance.
% Touch [Screen Off] in System menu.
The backlight turns off, and the screen turns
off.
p To turn on the backlight, touch the screen
again or press MAP button.
Customizing the AV Source Setting
En
142
Chapter
09