Filter
Top Products
Basic AV Source
This section describes basic AV operations,
such as adjusting the volume, switching the
source and stopping the source, using CD op-
erations as an example.
Selecting an AV source
1 Press VOLUME knob (or AV button) to
switch to the AV operation screen.
2 Press MENU button to change to AV
MENU.
3 Touch the source icon to select the de-
sired source in AV Source screen.
p Also, press VOLUME knob repeatedly when
the AV operation screen is displayed to
switch between sources:
[DISC] (CD, ROM, DVD-V, DivX (built-in DVD
drive)) — [RADIO] (tuner) — [iPod] (iPod)
— [XM] (XM tuner) — [SIRIUS] — (SIRIUS
tuner) — [USB] (USB audio) — [BT-TEL]
(Bluetooth Telephone) — [BT-AUDIO]
(Bluetooth Audio) — [M-CD] (multi-CD
player) — [M-DVD] (multi-DVD player) —
[AV-1] (video input1) — [AV-2] (video
input2) — [EXT-1] (external unit 1) —
[EXT-2] (external unit 2) — [OFF] (source
off)
p Touch [OFF] to switch the source to OFF.
p Touch [REAR SCREEN] to select the source
for Rear Display.
p Touch [TRAFFIC] to switchto XM or SIRIUS
screen that memorized traffic channel.
= Refer to Using the direct traffic announce-
ment function on page 107, page 112.
p Sources that are not connected to the navi-
gation system, sources that are busy read-
ing a disc or magazine, and sources with
incomplete settings cannot be used.
p The term “external unit” refers to a Pioneer
product (such as one available in the fu-
ture) that, although incompatible as a
source, enables control of basic functions
by the navigation system. Two external units
can be controlled by the navigation system.
When two external units are connected, the
navigation system allocates them to exter-
nal unit 1 or external unit 2.
p When [Antenna Control] mode is set to
[Radio], the vehicle’s antenna can be
stowed or turned off by following the in-
structions below.
— Change the source from radio (AM or
FM) to another source.
— Turn the sourceoff.
— Turn off the ignition switch (ACC OFF).
If [Antenna Control] mode is set to
[Power], the vehicle’s antenna can be
stowed or turned off only when the ACC is
set to “OFF”.
Adjusting the volume
% Use VOLUME knob to adjust the audio
sound level.
Rotate VOLUME knob to increase or decrease
the volume.
p To adjust the navigation volume (voice gui-
dance), access [Volume]inNAVI MENU.
= For details concerning operations, refer to
Volume on page 80.
Basic Operation
En
39
Chapter
02
Basic Operation