Filter
Top Products
2 Touch [Band] to select a band.
Touch [Band] repeatedly until the desired
band is displayed, FM1, FM2, FM3 or AM.
3 To perform manual tuning, touch
or briefly.
The frequencies move up or down step by
step.
4 To perform seek tuning, keep touching
or for about one second and re-
lease.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching
or you can
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
Switching between the detail
information display and the
preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch [Preset] (or [Detail]).
Each touch of [Preset] (or [Detail]) changes
the detail information display or preset list dis-
play.
Detail information display
Preset list display
Storing and recalling broadcast
frequencies
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily
store up to six broadcast frequencies for later
recall with the touch of a key.
Preset tuning keys (P1 — P6)
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key P1 — P6 until the preset
number (e.g., P.CH 1) stops flashing.
The selected radio station frequency has been
stored in memory.
p Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored
in memory.
2 The next time you touch the same pre-
set tuning key P1 — P6, the radio station
frequency is recalled from memory.
p You can also use a and b to recall radio
stations frequencies assigned to preset tun-
ing keys P1 — P6.
Using the AV Source (Built-in DVD Drive and Radio)
En
99
Chapter
07
Using the AV Source (Built-in DVD Drive and Radio)