Filter
Top Products
1 Press and hold OPEN/CLOSE button.
Flap Setup screen appears.
2 Touch [Flap Set Back].
Touching [Flap Set Back] switches between
[On] and [Off].
Setting the automatic open
function
When you do not wish the display to open/
close automatically, you can set the automatic
open function to the manual mode.
1 Press and hold OPEN/CLOSE button.
Flap Setup screen appears.
2 Touch [Auto Flap].
Each touch of [Auto Flap] changes the set-
tings as follows:
! Manual — You have to press OPEN/CLOSE
button to open/close the display
! Auto — The display automatically opens/
closes when power to navigation system is
turned on
Protecting Your Product
from Theft
The front panel can be detached from the dis-
play unit to discourage theft, as described
below.
CAUTION
! Never grip the display and the buttons tightly
or use force when removing or attaching.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
! After detaching the front panel, keep it in a
safe place so it is not scratched or damaged.
Removing the front panel
1 Press DETACH button to remove the
front panel.
2 Gently grip the right side of the front
panel and slowly pull it outward.
Take care not to drop the front panel and pro-
tect it from contact with water or other fluids
to prevent permanent damage.
3 Put the front panel into provided pro-
tective case for safe keeping.
Attaching the front panel
% Replace the front panel by holding it
upright to this product and clipping it se-
curely into the mounting hooks.
Basic Operation
En
33
Chapter
02
Basic Operation