Filter
Top Products
! In some cases, you may not be able to use
map display mode during DVD navi mode.
If the map display mode is not changed
during memory navi mode, the display will
return to the map display mode used dur-
ing the DVD navi mode when the DVD Map
Disc is set again.
! In memory navi mode, map scale data that
cannot be read in the memory cannot be
displayed. Accordingly, the edge of the
map will appear cut off along the point it
was not read into memory. This simply indi-
cates the edge of the map data, and is not
a malfunction.
! If you keep driving or scrolling the map to a
point where the map can no longer be dis-
played, the scale automatically switches to
a range possible to display. If you would
like to continue driving or scrolling the map
at the same scale, set the DVD Map Disc in
the navigation system.
! You cannot reroute to avoid traffic conges-
tion or closure.
! If you continue to drive outside the route
for a while, you may not be able to perform
map matching.
! If you deviate from the route during mem-
or y navi mode, the set route will be re-
routed, but only to return you to the original
route calculated within the memorized
area.
! Although an enlarged map of the intersec-
tion will be displayed, no special freeway il-
lustration (illustration of freeway
intersections) will be displayed.
! If the XM tuner (GEX-P10XMT, GEX-
P920XM), which is sold separately, is con-
nected, the logo data is not displayed dur-
ing memory navi mode.
Cautions relating to auto
reroute in memory navi mode
Auto rerouting in memory navi mode is de-
signed to return you to your original route
wherever possible.
In memory navi mode, persistently deviating
from the route may result in one of the follow-
ing:
! A clearly circuitous route
! Leaving a toll road and returning to the toll
road from where you left it
In the above case, if the set route seems un-
suitable, insert the DVD Map Disc that records
your current position. Setting the DVD Map
Disc to navigation automatically resets the
route from your current location to your desti-
nation.
TRAFFIC icon during the
memory navi mode
! XM NavTraffic-related data for a “Zone”
(e.g., Zone 1 contain ID, OR, WA) only can
be memorized. Therefore, if
appears
on the screen when crossing a zone border,
you will need to insert the disc to use the
XM NavTraffic function. Touching
al-
lows you to check the locations of the traf-
fic information along the route. However,
you cannot perform rerouting.
Operation outside the
memorized area
When the vehicle leaves the memorized area,
the functions will be limited.
! The auto reroute function does not work.
! You can only display a larger scale map.
The map display will automatically change
to a 25miles (or 50 miles) scale.
! The map matching function will not be
available. Therefore, the position of your ve-
hicle may be misaligned.
Appendix
En
161
Appendix
Appendix