Filter
Top Products
5 - 6
5. PARAMETERS
Class No. Symbol Name and function
Initial
value
Unit
Setting
range
Control
mode
Basic parameters
1*OP1
Function selection 1
Used to select the input signal filter, pin CN1B-19 function and
absolute position detection system.
Input signal filter
If external input signal causes chattering due to noise,
etc., input filter is used to suppress it.
0: None
1: 1.777[ms]
2: 3.555[ms]
3: 5.333[ms]
CN1B-pin 19's function selection
0: Zero Speed detection (ZSP)
1: Electromagnetic brake interlock (MBR)
CN1B-pin 18's function selection
0: Alarm (ALM)
1: Dynamic brake interlock (DB)
When using the external dynamic brake with 11kW or
more, make dynamic brake interlock (DB) valid.
Selection of absolute position detection system (Refer
to chapter 15)
0: Used in incremental system
1: Used in absolute position detection system
0002 Refer to
Name
and
function.
P S T