Filter
Top Products
13 - 24
13. OPTIONS AND AUXILIARY EQUIPMENT
13.1.8 Servo configurations software
The servo configuration software uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
(1) Specifications
Item Description
Communication signal Conforms to RS-232C.
Baudrate [bps] 57600, 38400, 19200, 9600
Monitor
Batch display, high-speed display, graph display
(Minimum resolution changes with the processing speed of the personal computer.)
Alarm Alarm display, alarm history, data display at alarm occurrence
Diagnostic
External I/O signal display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, ABS data display,
automatic VC offset display, shaft name setting.
Parameters Data setting, list display, change list display, detailed information display, turning
Test operation
Jog operation, positioning operation, motor-less operation, output signal forced output, program
operation in simple language.
Advanced function Machine analyzer, gain search, machine simulation.
File operation Data read, save, print
Others Automatic operation, station setting, help display
(2) System configuration
(a) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model (Note 1) Description
(Note 2)
Personal
computer
IBM PC-AT compatible on which Windows 95 or 98 (English) runs
(Pentium133MHz or higher recommended).Memory: 16MB or more, hard disk free space: 20MB or more,
serial port used.
OS Windows 95/98 (English)
Display 800 600 or more, 256-color or more display which can be used with Windows 95/98 (English).
Keyboard Which can be connected to the personal computer.
Mouse Which can be used with Windows 95/98(English). Note that a serial mouse is not used.
Printer Which can be used with Windows 95/98(English).
Communication
cable
MR-CPCATCBL3M
When this cannot be used, refer to (3) Section 13.1.4 and fabricate.
RS-232C/RS-422
converter
Needed to use the RS-422 multidrop communication function of the servo amplifier.
Note: 1. Windows is a trade mark of Microsoft Corporation.
2. On some personal computers, this software may not run properly.