Filter
Top Products
5. PARAMETERS
5 - 34
No. Symbol Name and function
Initial
value
[unit]
Setting
range
PD11 *DIF Input filter setting
Select the input filter.
Refer to the
"Name and
function" column.
Setting
digit
Explanation
Initial
value
_ _ _ x Input signal filter selection
Refer to the servo system controller instruction manual for the
setting.
If an external input signal causes chattering due to noise, etc., use
the input filter to suppress it.
0: None
1: 0.888 [ms]
2: 1.777 [ms]
3: 2.666 [ms]
4: 3.555 [ms]
4h
_ _ x _ For manufacturer setting 0h
_ x _ _ 0h
x _ _ _ 0h
PD13 *DOP2 Function selection D-2
Select a condition to turn on INP (In-position).
Refer to the
"Name and
function" column.
Setting
digit
Explanation
Initial
value
_ _ _ x For manufacturer setting 0h
_ _ x _ 0h
_ x _ _ INP (In-position) ON condition selection
Select a condition to turn on INP (In-position).
0: Within the in-position range
1: Within the in-position range and a command has been issued
When a command is not input for 1.33 ms, the command is
considered to have been issued.
0h
x _ _ _ For manufacturer setting 0h