Filter
Top Products
11. OPTIONS AND PERIPHERAL EQUIPMENT
11 - 28
(4) Battery replacement procedure
WARNING
Before replacing a battery, turn off the power and wait for 15 minutes or more until
the charge lamp turns off. Otherwise, an electric shock may occur. In addition,
when confirming whether the charge lamp is off or not, always confirm it from the
front of the servo amplifier.
CAUTION
The internal circuits of the servo amplifier may be damaged by static electricity.
Always take the following precautions.
Ground human body and work bench.
Do not touch the conductive areas, such as connector pins and electrical parts,
directly by hand.
POINT
Replacing a battery will erase the absolute position data.
Before replacing batteries, check that the new battery is within battery life.