Filter
Top Products
6. NORMAL GAIN ADJUSTMENT
6 - 8
(7) Clearing one-touch tuning
You can clear the parameter values set with one-touch tuning.
Refer to table 6.1 for the parameters which you can clear.
Pushing "Return to before tuning" in the one-touch tuning window of MR Configurator2 can restore the
parameter setting value before the start button is pushed.
In addition, pushing "Return to initial value" in the one-touch tuning window can restore the initial value.
When clearing one-touch tuning is completed, the following window will be displayed. (When restoring
the initial value)
6.2.3 Caution for one-touch tuning
(1) The tuning cannot be executed in the torque control mode.
(2) The one-touch tuning cannot be executed while an alarm or warning which does not continue the motor
driving is occurring.
(3) The tuning cannot be executed during the following test operation mode.
(a) Output signal (DO) forced output
(b) Motor-less operation