Filter
Top Products
6 - 26
6. PARAMETERS
No. Symbol Name and function Initial value Unit Setting range
PC37 *LPPL
PC38 *LPPH
Position range output address
Used to set the address increment side position range output address. Set
the same sign to parameters No.PC37 and PC38. Setting of different signs
will result in a parameter error.
In parameters No.PC37 to PC40, set the range where position range (RXnE)
turns on.
Set address:
Upper 3
digits
Lower 3
digits
Parameter No.PC38
Parameter No.PC37
Position range output address is a set of upper digits and lower digits. To
change the value, set in the order of lower digits to upper digits.
0
10
STM
m 999999
to
999999
PC39 *LNPL
PC40 *LNPH
Position range output address
Used to set the address decrement side position range output address. Set
the same sign to parameters No.PC39 and PC40. Setting of different signs
will result in a parameter error.
Set address:
Upper 3
digits
Lower 3
digits
Parameter No.PC39
Parameter No.PC40
Position range output address is a set of upper digits and lower digits.
To change the value, set in the order of lower digits to upper digits.
0
10
STM
m
999999
to
999999
PC41 For manufacturer setting 0000h
PC42 Do not change this value by any means. 0000h
PC43 0000h
PC44 0000h
PC45 0000h
PC46 0000h
PC47 0000h
PC48 0000h
PC49 0000h
PC50
0000h