Filter
Top Products
8 - 9
8. PARAMETER UNIT (MR-PRU03)
8.5.3 Monitor mode (status display)
(1) Monitor display
The servo status during operation is shown on the display. Refer to (2) in this section for details.
1. Current position
2. Command position
3. Command remaining distance
4. Point table No.
5. Cumulative feedback pulses
6. Servo motor speed
7. Droop pulses
8.
9.
10.
13. Peak load ratio
14. Instantaneous torque
15. Within one-revolution position
16. ABS counter
17. Load inertia moment ratio
18. Bus voltage
19.
20.
21.
MON
11. Regenerative load ratio
12. Effective load ratio
For manufacturer setting
For manufacturer setting
For manufacturer setting
For manufacturer setting
For manufacturer setting
For manufacturer setting