Mitsubishi Electronics MR-J3- T Car Amplifier User Manual


 
Print Data *Manual Number Revision
Oct., 2007 SH(NA)030058-C Section 13.2
Section 13.3
Section 13.5
Section 14.1.1
Section 14.1.1 2)
Section 14.1.2
Section 14.2 (1)
Section 14.2 (2)(b)
Section 14.2 (3)
Section 14.2 (4)
Section 14.2
(5)(b),(c)
Section 14.2 (5)
Section 14.3 (3)(b)
Section 14.4 (2)
Section 14.4 (3)
Section 14.4 (4)
Section 14.5 (3)(b)
Section 14.5 (4)(b)
2)
Section 14.5 (6)
Section 14.6 (2)
Section 14.7 (3)
Section 14.9 (1)
Section 14.9 (3)
Appendix 4
400V compatible added
Dynamic brake time constant and load inertia moment ratio
compatible with 400V added. The calculation methods and
graph in section 13.3.1, the permissible load inertia moment in
13.3.2, each divided by paragraph.
Inrush current at 400V added
Connector model changed for RoHS compatibility
Connector for MR-J3-200T4/350T4 added
Connector type and configuration changed for RoHS
compatibility
400V compatible regenerative option added
Descriptions of table modified
For parameter No.PA02, setting values 80 to 87 added
400V compatible regenerative option added
Due to the addition of MR-RB34-4 and MR-RB54-4, changed
dimension added
Description added
Outline drawing and dimension table changed
Note regarding stepdown transformer added
FR-RC-H15K, FR-RC-H30K, FR-RC-H55K added
FR-RC-H15K, FR-RC-H30K, FR-RC-H55K added
Note regarding stepdown transformer added
Wire diameter instructions changed
Description "compliant with JIS" deleted
Circuit in connection example changed, note regarding
stepdown transformer added
Outline drawing added
Recommended wires compliant with MR-J3-60T4 to MR-J3-
22KT4 added
Recommended twist cables for CC-Link changed
Table for changing connector set to RoHS compliant products
added
Feb., 2008 SH(NA)030058-D Safety Instructions
1. Additional
instructions
Partial change of sentence
CONFORMANCE WITH UL/C-UL STANDARD
(3)
(5)
Original item title: Short circuit rating, Original current value:
5000A
Fuse deleted
<<About the wires used for wiring>> Addition
Section 1.2 (1)
Section 1.4
Section 1.6.1 (2)
Section 1.7 (3)
Section 2.1 (1)(b)
Section 3.7.5 (2)
Section 4.3.1
Section 4.3.3
Original mass of MR-J3-200T: 2.3kg
Overview of MR-J3-200T changed
Overview of MR-J3-200T changed
Addition in diagram
Overview of MR-J3-200T changed
Addition in diagram
POINT Change of sentence
Ladder partial change
Description in table partially changed
Components of terminal block for MR-J3-200T changed