Filter
Top Products
112 DL-V3 User Manual Rev 3
For each message-logging specification, dst is added to the groupuse destination list (see the groupuse
command)
Action is limited to ADD and DEL for this command.
Message ID = 64
Table 38: GROUPLOG Default Configuration
Field Data
Value Used if
Not Specified
Bytes Format Units Offset
1 Header - - - 0
2 Action, see Table 25 on Page 96 - 4 Enum none H
3 Group name - 12 Char[] none H+4
4 Serial Port Identifier, see Table 67
on Page 150
NO_PORT 4 Enum none H+16
5 Message ID - 4 Ulong none H+20
6 Trigger (see the LOG command in
the OEMV Family Firmware
ONCE 4 Enum none H+24
7 Period 0 4 Float seconds H+28
Parameter Power-On Freset Stored in NVM
Log configuration no change See Section B.10.1, Factory-Reset
DEFAULT Group on Page 96
YES