Filter
Top Products
82 DL-V3 User Manual Rev 3
Table 14: DL-V3 Commands in Order of their Message IDs
1 log Request logs from the receiver
157 logfile Manual file logging control
163 methumid Specify air humidity
164 metpress Specify air pressure
165 mettemp Specify ambient temperature
211 project Project-related parameters
201 rename Rename a file stored in the CF Card
18 reset Perform a hardware reset
212 satlimit Specify the minimum number of satellites to use in the
position solution
166 site Control site occupations
167 siteupdateantheight Configure occupied site’s antenna height information
168 siteupdateanttype Configure site antenna type information for an occupied site
169 siteupdateattribute Configure site attribute information for an occupied site
170 siteupdatename Configure site name information for an occupied site
171 siteupdatenumber Configure site number information for an occupied site
213 softpower Power-button OFF simulation
257 write Create logs containing user data
204 writefile Create files or append data to an existing file on the CF Card
where the data format is char
240 writefilehex Create files or append data to an existing file on the CF Card
where the data format is hexbytes
205 writehex Create logs containing user data
Message ID ASCII Command Description
1 log Request logs from the receiver
18 reset Perform a hardware reset
20 freset Factory reset
53 del Delete files from the CF Card
54 group Modify log group definitions
55 groupantsn Edit the serial number for the group
56 groupecutoff Edit the elevation cut-off configuration for the group
Continued on Page 83
Message ID ASCII Command Description