Filter
Top Products
80 DL-V3 User Manual Rev 3
A.2.2.4 I/O Strobe Port Cable (NovAtel part number 01017660)
The strobe lines on the DL-V3 can be accessed by inserting the male DB9 connector of the I/O strobe
port cable into the I/O port. The other end of this cable is provided without a connector to provide
flexibility. The jacket insulation is cut away slightly from the end but the insulation on each wire is
intact. The cable is approximately 2 m in length. See Figure 37 below.
This cable is RoHS compliant.
Wiring Table:
Reference Description Reference Description
10 DB9P (male) connector 11 9-conductor cable
Figure 37: DL-V3 I/O Strobe Port Cable
I/O Port
Pin
I/O Port
Signal
I/O Port Cable
Wire Color
I/O Port
Pin
I/O Port
Signal
I/O Port Cable
Wire Color
1 VARF Black 6 Event2 Green
2 PPS Brown 7 _RESETOUT Blue
3 MSR Red 8 ERROR Violet
4 Event1 Orange 9 GND White/Grey
5 PV Yellow
1
5
9
6
1
2
3
4
5
6
9
7
8