Filter
Top Products
DL-V3 User Manual Rev 3 163
C.9 GROUPDEF Log Group Configuration
The GROUPDEF log contains configuration information for a group definition on the receiver, for the
group identified by the currentgroup setting. If no valid currentgroup selection is specified, this log
lists information for all groups present on the receiver.
1. This log structure is backwards-compatible with existing PDC and OEMV firmware. There
are changes to this log from previous versions in fields 9, 10 and 20.
2. This log no longer contains all of the information that defines a group. A
GROUPCOMCONFIG log is also needed to complement the information in the
GROUPDEF log.
Structure: Message ID = 148
Log Type: Polled
Field Data Description Bytes Format Units Offset
1 Header Log header, see Page 149 --0
2 GroupName Group name 12 Char - H
3 SessionName Session name (set to null) 8 Char - H+12
4 AntSN Antenna serial number 16 Char - H+20
5 AntType Antenna type 16 Char - H+36
6 AntHeight Antenna height 4 Float Metres H+52
7 GroupEcutoff Group elevation cut-off angle (set
in the GROUPECUTOFF
command)
4FloatDegreesH+56
8 SatLimit Number of SV filter 4 Integer - H+60
9 GroupStatus1 Group Status1 word, see Table 75
on Page 166
4 HexUlong - H+64
10 GroupStatus2 Group Status2 word, see Table 76
on Page 167
4Ulong- H+68
11 Lat
Latitude
a
8 Double (Degree
s) (s)
H+72
12 Lon
Longitude
a
8 Double (Degree
s) (s)
H+80
Continued on Page 164