Filter
Top Products
122 DL-V3 User Manual Rev 3
Field
Field
Name
ASCII
Value
Description
Field
Type
1LOG
(ASCII)
header
- This field contains the command name or the
message header depending on whether the
command is abbreviated ASCII or ASCII
respectively.
-
2 port See Table 46,
Detailed Serial Port
Identifiers on Page
123
Output port
(default = THISPORT)
Enum
3 message Any valid message
name, with an
optional A or B suffix.
Message name of log to output Char [ ]
4 trigger ONNEW Output when the message is updated (not
necessarily changed)
Enum
ONCHANGED Output when the message is changed
ONTIME Output on a time interval
ONNEXT Output only the next message
ONCE Output only the current message. (default)
ONMARK Output when a pulse is detected on the mark
1 input, MK1I
5 period Any positive double
value larger than the
receiver’s minimum
raw measurement
period
Log period (for ONTIME trigger) in seconds
(default = 0)
Double
6 offset Any positive double
value smaller than the
period.
Offset for period (ONTIME trigger) in seconds.
If you wished to log data at 1 second after
every minute you would set the period to 60
and the offset to 1 (default = 0)
Double
7 hold NOHOLD Allow log to be removed by the UNLOGALL
command (default)
Enum
HOLD Prevent log from being removed by the
UNLOGALL command