Filter
Top Products
84 DL-V3 User Manual Rev 3
The arguments for each of these commands are described in the following sections.
For a complete listing and description of the other commands that the DL-V3 is capable of processing,
please refer to the OEMV Family Firmware Reference Manual.
B.1 SYNTAX CONVENTIONS
The following rules apply when entering commands, at the command prompt, from a keyboard.
1. Courier font is used to illustrate program output or user input.
2. References to other commands, logs or any of their fields are shown in italics.
3. The commands are not case sensitive. For example, you could type either METTEMP 0 or
mettemp 0.
4. Except where noted, either a space or a comma can separate commands and their required entries.
For example, you could type either group del alpha p20a or
group,del,alpha,p20a.
5. At the end of a command, a carriage return is required. For example, press <Enter> or <Return>
on your keyboard.
6. Responses are provided to indicate whether or not an entered command was accepted. The format
of the response depends on the format of the command. Refer to the OEMV Family Firmware
Reference Manual for more information.
7. Optional parameters are indicated by square brackets ( [ ] ). For commands that contain
optional parameters, the value used if the optional parameter is not specified is given in the syntax
table for the command.
8. Data format definitions, as specified in the “Format” field, are detailed in the OEMV Family
Firmware Reference Manual. Note that all binary data is little-endian byte-ordered.
257 write Create logs containing user data
271 groupdgpstxid Edit the DGPS base ID configuration for the group
284 disk Carry out CF card maintenance
318 groupinterfacemode Edit the interface mode configuration for the group
753 groupcomvout Control power on specified COM ports for the group
755 groupcom Associate one or more port configurations with a group
779 comvout Control the peripheral power supply on specific COM ports
781 appcontrol Switch between Ethernet and Bluetooth on COM3
Message ID ASCII Command Description