Filter
Top Products
Installation and Setup Chapter 2
DL-V3 User Manual Rev 3 43
HyperTerminal window. This enables you to view the characters you type.
3. Type in LOG VERSION and press the <Enter> key to ensure you have a two-way serial connec-
tion with the DL-V3. If you do, a VERSION output message appears. For example:
4. Ensure the CF card is in its DL-V3 slot.
5. Type in DISK FORMAT and press the <Enter> key.
6. Wait a minute and power off the DL-V3.
7. Power on the DL-V3 again and the CF card is ready to use.