Filter
Top Products
DL-V3 User Manual Rev 3 165
Table 73: DGPS Type
Table 74: COM1/COM2 Interface Modes
28 Port Serial port identifier, see Table 67
on Page 150.
4 Enum - H+180
29 Reserved for future use 4 Float - H+184
30 2 Ushort - H+188
31 1 Uchar - H+190
32 1 Uchar - H+191
Next Log Spec Offset = H + 168 + (N * 24)
a. A Group Status1(field 9) output of Position Average Enable indicates that these
GROUPDEFB fields are used to represent averaging options. Analogously, a Group Status1
output of Position Fix Enable indicates that fields represent the fixed position itself.
Field Data Description Bytes Format Units Offset
DGPS Type
Binary ASCII
Description
0 RTCM RTCM ID Type
1 RTCA RTCA ID Type
2 CMR CMR ID Type
10 AUTO Automatic type
Value Description
0x0000 00FF COM1 Rx interface mode. The 1-byte binary value corresponds to the
enumerated Serial Port Interface Modes table.
a
a. Refer to the INTERFACEMODE command in the OEMV Family Firmware
Reference Manual
0x0000 FF00 COM1 Tx interface mode. The 1-byte binary value corresponds to the
enumerated Serial Port Interface Modes table.
a
0x00FF 0000 COM2 Rx interface mode. The 1-byte binary value corresponds to the
enumerated Serial Port Interface Modes table.
a
0xFF00 0000 COM2 Tx interface mode. The 1-byte binary value corresponds to the
enumerated Serial Port Interface Modes table.
a