Filter
Top Products
152 DL-V3 User Manual Rev 3
16-17 Reserved
18 GENERIC The port accepts/generates nothing. SEND/SENDHEX
commands from another port generate data on this port. Any
incoming data on this port can be seen with PASSCOM logs on
another port, refer to the OEMV Family Firmware Reference
Manual.
a. An output interfacemode of RTCMNOCR is identical to RTCM but with the CR/LF
appended. An input interfacemode of RTCMNOCR is identical to RTCM and functions
with or without the CR/LF.
b. CDGPS has three options for output of differential corrections - NMEA, RTCM, and
GPS*C. If you have a ProPak-V3 receiver, you do not need to use the INTERFACE-
MODE command with CDGPS as the argument. The CDGPS argument is for use with
obsolete external non-NovAtel CDGPS receivers. These receivers use GPS*C (NavCan-
ada’s proprietary format differential corrections from the CDGPS service).
c. The AUX port, and therefore TAUX mode, is only available on OEMV-2-based and
OEMV-3-based products.
Binary Value ASCII Mode Name Description