Filter
Top Products
DL-V3 User Manual Rev 3 129
B.31 METTEMP Specify Air Temperature
The mettemp command allows you to specify ambient temperature. Temperature specified with the
mettemp command does not affect receiver operation. Rather, it allows you to create a record of
atmospheric conditions for post-processing purposes.
The mettemp set command specifies air temperature at temp. This command only stores the
temperature in volatile memory, and does not automatically generate a record. The temperature can
then be displayed/recorded by requesting the met log.
The mettemp clear and the mettemp default commands clear the temperature setting.
The mettemp default command clears the temperature setting.
Syntax
mettemp set [temp]
mettemp default|clear
Message ID = 165
Table 51: METTEMP Default Configuration
Field Data
Value Used if
Not Specified
Bytes Format Units Offset
1Header - - 0
2 Parameter Update, see Table 34
on Page 107
4 Enum none H
3 Temperature 0 4 Float Celsius or
Fahrenhei
t
a
a. You may use Celsius or Fahrenheit in your float input, depending on your preference
H+4
Parameter Power-On Freset Stored in NVM
metpress clear clear NO