Filter
Top Products
172 DL-V3 User Manual Rev 3
C.13 RXSTATUS DL-V3 Status
The AUXILIARY2 and AUXILIARY3 status words of the RXSTATUS log are defined as in Table 79
on Page 172 and Table 80 on Page 173, to indicate DL-V3 functionality. The corresponding priority,
set and clear masks can be defined via the STATUSCONFIG command. Refer to the RXSTATUS log
and STATUSCONFIG command in the OEMV Family Firmware Reference Manual.
1. These auxiliary word definitions replace those used in the DL-4 receivers.
2. The corresponding priority, set and clear masks can be defined via the OEMV
STATUSCONFIG command.
Table 79: Auxiliary 2 Status Word
AUX2 Bit Description Bit=0 Bit=1 Trigger
0x00000001 DL-V3 status not ready ready XCOM1 is
initialized and
ready for use
0x00000002 Shutdown indicator no shutdown shutting down Press the power
button or issue
any of the
softpower,
freset or reset
commands
0x00000004 DL-V3 boot status boot in progress boot done All start-up
events are
complete
0x00000008 CF card status not initialized initialized CF card
removal or
installation
0x00000010 File(s) status all files closed file(s) open -
0x00000020 Site status not occupied occupied -
0x00000040 Power button status not pressed pressed Press the power
button
0x00000080
Reserved
-
0x00000100 -
0x00000200 External power not in use in use -
Continued on Page 173