Filter
Top Products
DL-V3 User Manual Rev 3 161
C.8 GROUPCOMCONFIG COM Port Configuration Information
The groupcomconfig log contains COM port configuration information for the currentgroup
specified for the receiver.
If no valid currentgroup selection is specified, this log lists COM port configurations for all groups
present on the receiver.
Structure: Message ID = 754
Log Type: Polled
Field Data Description Bytes Format Units Offset
1 Header Log header, see Page 149 -- -0
2 Group name Group name 12 Char[ ] H
3 # ports Number of ports 4 Long H+12
4 Port Serial port identifier, see Table 67
on Page 150
4 Enum H+16
5 Status Com config status word, see
Table 72 on Page 162
4 HexUlong H+20
6 Baud Communication baud rate 4 ULong H+20
7Parity See Table 68 on Page 150 4 Enum H+24
8 Databits Number of data bits 4 ULong H+28
9 Stopbits Number of stop bits 4 ULong H+32
10 Handshake See Table 69 on Page 150 4 Enum H+36
11 Echo When echo is on, the port is
transmitting any input characters as
they are received.
0 = OFF
1 = ON
4 Enum H+40
12 Breaks Breaks are turned on or off
0 = OFF
1 = ON
4 Enum H+44
13 Rx_type The status of the receive interface
mode, see Table 70, Serial Port
Interface Modes on Page 151
4 Enum H+48
Continued on Page 162