Filter
Top Products
60 DL-V3 User Manual Rev 3
Chapter 4 DL Explorer
Preset POWERUP Group
Your DL Explorer software is set up with a preset receiver group. Below is an outline of the
POWERUP group. The group name, the logs within the group and the interval options are displayed
(see details on editing trigger and interval information on Page 59).
Use this group when you are working with a receiver that is an RTK base and you want to post-
process the data. You might also use this group for automatic data collection on the receiver.
Position Tab
The second tab in the DL Groups dialog is the Position tab, see Figure 21 on Page 61. Click in one of
the radio buttons that give you the option of having no position information, known fixed position
information (a static point) or single-point averaging information.
If you choose No Position Information then the Position tab’s Known Position and Position Average
edit boxes appear dim. If you choose Fixed Known Position then you must enter position information
(latitude, longitude and ellipsoidal height) in the Known Position fields.
Type of Information Description
almanacb onchanged current almanac
ionutcb onchanged ionospheric and UTC clock parameters
rangecmpb ontime
10.0
compressed channel range measurements
rawephemb
onchanged
raw ephemeris
rtcaobs ontime 1.0 base station GPS data output every second
rtcaref ontime 10.0 base station position output every 10 seconds
The first four types of information (almanac, ionutc, rangecmp and rawephem) are
typically used for post processing and are logged to the CF card. The last two (rtcaobs
and rtcaref) are typically used for an RTK base station and are transmitted from COM2.