Filter
Top Products
116 DL-V3 User Manual Rev 3
B.24 GROUPSITENAME Edit Group Site Name
The groupsitename command allows you to edit the site name definition for the group.
The groupsitename set command sets the site name for the group named groupname to sitename.
The groupsitename clear and the groupsitename default commands remove the site name setting from
the group named groupname.
Syntax
groupsitename set groupname sitename
groupsitename default|clear groupname
B.24.1 Groupuse Translation
groupuse start
The site name is reflected in the groupdef log.
If an automatic site is being generated (see the groupmode command on Page 113), the group site
name is used in the site configuration. If the group site name is not specified and an automatic site is
being generated, the log file name is used as the site name.
groupuse stop
N/A
Message ID = 59
Table 43: GROUPSITENAME Default Configuration
Field Data Bytes Format Units Offset
1Header - - 0
2 Parameter Update, see Table 34 on Page 107 4 Enum none H
3 Group name 12 Char[] none H+4
4 Site name 32 Char[] none H+16
Parameter Power-On Freset Stored in NVM
sitename no change NUL YES