Filter
Top Products
DL-V3 User Manual Rev 3 73
A.2 DL-V3 Specifications
INPUT/OUTPUT CONNECTORS
Antenna Input TNC female jack, 50 Ω nominal impedance
+4.75 to +5.10 V DC, 100 mA max
(output from DL-V3 to antenna/LNA)
PWR 4-pin LEMO connector
+9 to +28 V DC at 3.5 W (typical while logging)
a
In-rush power consumption: 8 A for less than 120 μs
b
COM1
COM2
COM3
AUX
I/O
OSC
DB9P connector
DB9P connector
Bluetooth v1.1 interface or Ethernet
c
DB9P connector
DB9S connector
BNC connector (external oscillator)
NOVATEL PART NUMBER
DL-V3 01017829
LED INDICATORS
More details can also be found in Section 2.2.3, Status Indicators starting on Page 35
Power
Orange: receiver is powered
Green: receiver is turned on
Status
Orange flash: at start-up
Off: normal operation
Orange flash again: status event
COM1/COM2/ AUX
Green flash (top): transmitting
Amber flash (bottom): receiving
COM3
Blue: Bluetooth active
Orange: Ethernet active
Satellite Tracking
Positioning Mode
See Table 8, Positioning Mode LEDs on Page 37
Continued on Page 74
LED#
# of
SVs
LED
Color
1 (left) ≤ 3 Red
2 4 or 5 Amber
3 6 or 7 Green
4 8 or 9 Green
5 (right) ≥ 10 Green