Filter
Top Products
DL-V3 User Manual Rev 3 117
B.25 GROUPSITENUMBER Edit Group Site Number
The groupsitenumber command allows you to edit the site number definition for the group.
The groupsitenumber set command sets the site number for the group named groupname to
sitenumber.
The groupsitenumber clear and the groupsitenumber default commands remove the site number
setting from the group named groupname.
Syntax
groupsitenumber set groupname [sitenumber]
groupsitenumber default|clear groupname
B.25.1 Groupuse Translation
Syntax
groupuse start
The site number setting is reflected in the groupdef log.
If an automatic site is being generated (see the groupmode command on Page 113), the group site
number is used in the site configuration.
groupuse stop
N/A
Message ID = 61
Table 44: GROUPSITENUMBER Default Configuration
Field Data
Value Used if
Not Specified
Bytes Format Units Offset
1 Header - - - 0
2 Parameter Update, see Table 34
on Page 107
- 4 Enum none H
3 Group name - 12 Char[] none H+4
4 Site number NUL 8 Char[] none H+16
Parameter Power-On Freset Stored in NVM
sitenumber no change NUL YES